There’s nothing more annoying when you have friends over to throw a fabulous party except when they all have their music on their devices, and instead of the ambiance you wanted, it just sounds like a jumbled mess. In this post, I’m going to show you exactly how to connect two Bluetooth speakers to an iPhone so you can crank up the volume and sync the same music with your friends on their devices.
Why 2 Speakers Are Better Than One
When setting up a speaker system, people’s most significant mistake is just not having enough. The truth is, even a single wireless speaker can sound great in your home or apartment. But you need at least two to get that big, full sound that makes parties come alive. When it comes time to set up multiple speakers, don’t forget these tips:
- Make sure they are paired with one another
- Keep them no more than 10 feet apart. It will ensure maximum stereo separation so that each speaker can fill out a different part of the music’s frequency spectrum, bass, mid-range, and treble sounds, each coming from its source.
How To Connect Two Speakers to an iPhone
Before we get started, you’ll need to ensure that both of your Bluetooth-enabled speakers support A2DP. If they do, you’re good to go! Connecting Multiple Bluetooth Speakers to an iPhone can be as easy as downloading a free app from Apple and following these simple steps.
Follow along below to learn how to connect multiple Bluetooth speakers to an iPhone:
Step 1: Launch Settings on your iOS device.
Step 2: Tap Bluetooth and make sure it is turned ON.
Step 3: Tap Bluetooth Setup Mode and wait until a voice prompt tells you it is ready for pairing mode.
Step 4: On one of your Bluetooth-enabled devices, tap Setup New Device to pair with another speaker or device.
Sync Music Between Two iPhones
To sync music between two iPhones, you need to pair them both with a Bluetooth speaker or receiver and set them up so they can all play from one source. It is super easy to do and will make your next music night more fun.
The key here is making sure that you don’t play off of one iPhone, you want everyone’s music synced together with no interruption.
Here are three ways you can connect two Bluetooth Speakers to One iPhone: Connecting two Bluetooth speakers to an iPhone is as simple as pairing them. Make sure both devices are turned on and in range of each other, then follow these steps:
This option takes some time, but it works great if you already have multiple wireless devices. If not, I recommend checking out my favorite portable Bluetooth speaker below: JBL Charge 3 Waterproof Portable Wireless Speaker.
One of my favorites because it has a long battery life (20 hours), incredible sound quality, and it is waterproof (IPX7 rated). It’s also small enough to take anywhere! Check out our full review here.
How Can I Connect Multiple Bluetooth Speakers to My iPhone?
For example, you can pair multiple Bluetooth devices like your iPhone and a set of speakers, but it takes a little effort. Here’s how:
- On your iPhone, go to Settings > Bluetooth. Turn Bluetooth on if it’s not already (it’ll be grayed out if you have Wi-Fi turned on).
- Put one of your wireless speakers into pairing mode by holding down its power button until you see its LED light blinking rapidly, usually about 10 seconds or so.
- On your iPhone, tap Refresh Devices in Settings > Bluetooth, and then search for new devices in Available Devices (look in the lower right corner). It may take some time; keep trying if nothing appears at first.
When Can You Connect Multiple Bluetooth Speakers to an iPhone?
Technically, you can add multiple Bluetooth speakers to your iPhone as long as both devices use discoverable mode. It means that both devices have to be within the range of each other (less than 30 feet) and actively broadcast their Bluetooth signal. For example, you could choose either one if you’ve got a speaker in your home office and another one that connects wirelessly with your TV in your living room.
But if you’re connected via AirPlay or aux cable, you cannot add any more devices or change which one plays music. Each time you try pairing another device with AirPlay or AUX cables, you’ll get an error message telling you how many are already connected.
Connecting two Bluetooth speakers is easy. You first need to make sure both devices are paired and connected with your iPhone or iPad. After that, you have to pair your device with one speaker and allow it a few seconds (3-5 seconds) before pairing it with your second speaker. Once that’s done, both devices will play in sync.
How to Connect Multiple Bluetooth Headphones to an iPhone?
You can pair multiple Bluetooth devices (including headsets, headphones, and other audio devices) with your iPhone to listen to music from different sources at once. For example, you could listen to music on a Bluetooth speaker and simultaneously answer calls through a headset.
To pair multiple Bluetooth devices, open your iPhone’s Settings app, then select Bluetooth in the list of settings that appears. Select Paired Devices from under Bluetooth in Settings, tap or swipe down until you see all paired Bluetooth devices listed at the bottom of the screen.
What are the Options for Connecting Multiple Bluetooth Speakers to an iPhone?
It’s possible to connect multiple Bluetooth speakers with one iPhone or iPad as long as both devices are running iOS 6, which is available as a free update and can be installed by going into your device’s settings app and checking for updates.
How to connect two Bluetooth speakers to one phone?
Connect the Bluetooth speakers to the phone using the audio cable. Just plug the headphones into the speaker and let the speakers automatically connect with the phone. If you want to change the settings, you can access the Bluetooth settings of the phone and adjust the settings.
Can you play 2 Bluetooth speakers at the same time?
To connect two Bluetooth speakers to one phone, turn on one speaker and pair it with your device. Then turn on the other speaker, connect your device to the other speaker, and pair it with the other speaker.