How To Get Water Out Of Speaker

A speaker is an electric device that produces sound from an electric current. It is a device that is mainly used to amplify audio signals. The speakers are attached to a device that generates audio signals, such as a compact disc player, CD player, radio tuner, tape player, television, or computer.

After working 10-12 hours a day at a desk, it feels good to bring your feet up and relax with some music. Listening to music is not the only thing you can do with your speakers; you can also use it for outdoor purposes, such as listening to music at a pool party or on a beach.

But, if you are using your speaker around water, there is a possibility that you might use it near water and get water in your speaker.

How to get water out of the speaker

If you get water in your speaker, there is a possibility that the water will damage it. These damages may include rusting of wires and corrosion of metal parts. The process for getting water out of the speaker is not very complicated, but it requires some effort on your behalf to remove all the possible sources of dampness from the inside.

It’s expected that most speaker manufacturers disallow speakers to be submerged in water. Sometimes, it is advised not to get your speaker near water too. But, there are some options available if you want to use your speaker near water.

To begin how to get water out of the speaker, start by turning off and unplugging the speaker.

Once the speaker is unplugged, remove the grill or cover from the speaker’s front. It will give you access to the drivers located in the back of the speaker.

Once you have access to the drivers, use a vacuum cleaner to remove any water that might be hiding in there. If there is no water in the drivers, you can skip this step.

However, if there is water in the drivers, you will need to remove it with a vacuum cleaner. After removing all of the possible water from the drivers, use a hairdryer on its highest setting to dry out the inside of the speaker.

Ensure that you hold the hairdryer a few inches away from the speaker and dry it for at least five minutes.

Once you have finished drying the speaker, put the grill or cover back on and plug in the speaker.

Turn on the speaker and test it to see if it is working correctly. If it is not working correctly, you might need to take it to a professional to fix it.

If you follow these simple steps, you will be able to get water out of your speaker and prevent any damage caused by the water. With a little bit of effort, your speaker will be as good as new.

Things To Avoid While Getting Water Out of Speaker

If you want to know how to get water out of the speaker, here are a few things that you should avoid doing:

Do not drink or swallow any of the water from your speakers.

Do not use a vacuum cleaner with a rotating brush on your speaker grill, as this can cause damage to the grill.

Do not use a hairdryer on your speaker for an extended period as it may damage the sensitive parts inside your speaker.

Do not attempt to open the speaker if you do not have a screwdriver or other tools to help you open the speaker. If there is access to the drivers, you should get water out of the speaker by using a vacuum cleaner or a hairdryer.

Conclusion

By following the steps mentioned above, it should be easy for you to get water out of your speaker and avoid any damage caused due to the presence of water. Speakers are an integral part of our everyday life, and we all enjoy listening to music using them.

So, you must know how to get water out of speakers since they can be easily damaged if not taken care of properly.

If you have any other suggestions on how to get water out of your speaker, do share them with us in the comments section below!

FAQs

Will the water in speakers go away?

The water in the speaker will eventually go away on its own. However, if you want to speed up the process, you can use a vacuum cleaner or a hairdryer to remove the water.

Can I open my speaker?

If you have access to the drivers, you should get water out of the speaker by using a vacuum cleaner or a hairdryer. Opening your speaker will void the warranty and may cause damage to the delicate parts inside the speaker, which is why you should never attempt to open your speaker unless necessary.

How long can I wait to get water out of my speakers?

You should not leave water in your speaker for more than 48 hours. If you leave the water in your speaker for an extended period, it might cause significant damage to the drivers.

How do I know if my speakers are still good?

If you want to test whether or not your speakers are still good, play some music at total volume and check whether or not the sound is distorted. If the sound is distorted, your speakers might be damaged, and you will need to take them to a professional to have them repaired.

Can I use a vacuum cleaner to get water out of my speakers?

If there is water in the drivers, you can use a vacuum cleaner to remove it. Make sure that you hold the vacuum cleaner a few inches away from the speaker and do not pressure it. Using too much pressure can damage your speakers.