How to repair speaker coil – Useful Tips

The speaker coil is one of the most important components of the speakers. It would help if you were quite careful about the speaker coil when repairing the speaker. In this blog, you will find detailed information about repairing the speaker coil with the help of different tools.

How to repair the speaker coil?

The first step is to remove the speaker cone. For this, you need to use a screwdriver to remove the screws holding the speaker cone in place. After removing the screws, you can pull out the speaker cone carefully.

Now, you need to remove the dust cap from the speaker coil. It can be done by using a screwdriver to pry out the speaker dust cap from its place. After removing this, you can now see the cone attached to the voice coil.

To reassemble the parts again, you must attach them back to their original position. The next step is to solder the wire and braiding material if needed to the speaker wire. It can be done by heating the tip of the wire with the help of a soldering iron. You are now ready to put these components back in their position, careful not to twist any of them.

After reassembling the parts, you need to test whether they are working fine or not. If you hear any unusual sound, then it might be that the reassembly has not been done properly. In this case, you need to start over again.

If everything is working fine even after testing them several times, then it means the repair has been successful. Close up all the parts carefully to avoid any damage to them.

You can use a screwdriver to attach the screws in their original position. Make sure that whatever you do, your voice coil has been properly reassembled and repaired without causing any damage to it.

Replacement of the Speaker Coil:

In case you are not able to repair the coil, then you might need to replace it. You can find different types of replacement coils in the market, which can be easily fitted in the old one. If you are not sure how to do it, you can take help from a professional.  

After replacing the coil, you need to test the speaker again to check for defects. It will ensure that after repairing and replacing the parts of your speakers, you can use them with ease and without encountering any problems.

Conclusion:

Finally, after repairing and replacing the speaker coil, you need to test it for any defects. If everything seems fine, then you can use your speakers with ease. Always keep in mind that whenever there is a problem with your speaker, and you want to repair them yourself without taking the help of a professional, then you should be very careful while handling the speaker coil.

It is one of the most delicate and important parts of the speaker, and if it gets damaged, you might not be able to fix it without replacing it. So, make sure that you handle it with care and do not try to repair it if you are not confident about doing it yourself. Thanks for reading!

FAQs

How do you fix a coil voice on a speaker?

One of the most common reasons for this problem is that a small piece of wire or a metal shard may get stuck inside the coil. It can cause it to short circuit and thus, disrupting the sound produced by the speaker. 

To fix such a problem, you need to open up your speakers and carefully remove any parts causing the disruption. You can then try to remove the wire or shard stuck inside the coil.

What is a speaker coil rub?

Speaker coil rub is a common issue that can be caused due to many reasons. This problem usually occurs when something is wrong with the wiring or when the speaker is not properly aligned. 

You need to open up your speakers and check the wiring to fix this. You might also need to realign the speaker if it is not in the correct position.

Can you replace a speaker coil without opening the speaker?

It is not possible to replace the speaker coil without opening up the speaker in most cases. The coil is usually attached to the cone and other components that need to be removed to access it. However, there are a few exceptions where you can replace the coil without opening the speaker. For example, if you have a driver with a removable magnet, you can replace the coil without opening the speaker.

Is it necessary to remove the voice coil to repair a speaker?

It is not necessary to remove the voice coil to repair a speaker in most cases. However, there are a few exceptions where you might need to remove the coil to fix the problem. For example, if there is something wrong with the wiring or the speaker is not properly aligned, you might need to remove the coil to fix the problem.

Leave a Reply